NIM PANEL is used in all kinds of interior and exterior cladding of buildings, autoclave hardened flat or wood patterned surface appearance of natural fiber cement based plates.

WHAT ARE THE ADVANTAGES OF NIM PANEL?

• It is produced from completely natural materials and is environment friendly, nature and human friendly.
• It does not contain any substances harmful to human health.
• Low maintenance
• It is not affected by any pests that are harmful to trees and does not contain pests.
• It can be used safely in humid climates and has low water exposure value (max. 0.5 mm / m when left in water for 24 hours)
• Fireproof, insoluble (Class A1 according to EN 13501-1 Fireproof construction material.
• Due to the cement and silica in its structure, it can be painted with acrylic exterior paint and plastic interior paint applied in normal buildings.
• It gives the buildings a warm appearance of wood with their wooden patterned appearance, but their physical properties are superior to wood.
• Their life is theoretically the last when appropriate protection measures are taken.
• It is not affected by sea water moisture and can be used safely on the exterior of the coastal structures.
• It is not affected by ultraviolet rays.
• Waterproof, water absorption rate is lower than that of reinforced concrete buildings. (waterboard)
• Easily machined and assembled with suitable tools.
• It also provides economy in buildings since it does not require plaster.
• Resistant to impact and impact.
• It is light, easily transportable (8 mm thick plate weighs 11.2 kg / m2).
• It is odorless and does not produce any harmful gases.
• Resistant to animal wastes, chemicals.
• It has good sound and heat insulation.
• Due to their raw materials and autoclaved structure, they are very resistant to atmospheric conditions.
• It binds very well to various insulation materials (polystyrene foam, etc.) so that it can be used as a sandwich panel for various purposes.

NIM PANEL TECHNICAL SPECIFICATIONS

• Product Type: Cellulose fiber reinforced cement and silicate based autoclaved plate
• Material Properties: Can be easily processed with hard concrete processing tools that are resistant to all climatic conditions
• Sheet Size: 1250x2500 mm - 1250x3000 mm
• Thickness: 6 - 8 - 10 - 12 - 14 - 16 - 18 - 20 mm
• Length Tolerance: ± 5 mm
• Width Tolerance: ± 3,75 mm
• Thickness Tolerance: ± 10% e (flat plate) - 10% e / + 15% e (patterned plate) (e: plate thickness)
• Deviation from Right Angle: ± 2 mm / m
• Smoothness of edges: ± 0.1% a (a: width or length of sheet)
• Surface Appearance: Plain or Wood pattern
• Raw Density: 1350 ± 50 kg / m3
• Diffusion Resistance Number:: µ = 250
• Bending Strength (flat sheet): 18.0 N / mm2 (sheet longitudinal): 12.0 N / mm2 (sheet transverse)
• Bending Strength (patterned plate): 15.0 N / mm2 (plate longitudinal): 10.0 N / mm2 (plate transverse)
• Compressive Strength: 30.0 N / mm2 (perpendicular to the surface of the plate)
• Tensile Strength: 2.0 N / mm2 (perpendicular to the surface of the plate)
• Freezing Strength: Waterproof in accordance with TS EN 12467. (waterboard)
• Flame Resistance: Fireproof, A1 class construction material according to EN 13501-1
• Asbestos content: Asbestos-free
• Other pollutant emissions: No pollutant or gas emissions
• Heat Elongation Coefficient: t: 0,005 mm / Mk
• Heat Transmission Coefficient:? 0.18 W / Mk
• Elasticity Module: 8000 N / mm2 (sheet longitudinal) 6000 N / mm2 (sheet transverse)
• Water Absorption Rate: <30% (full saturation to water)
• Stock Humidity: <10% (depending on atmospheric humidity)
• Water Exposure: 0.5 mm / m (at full saturation)
• Twist Radius: 12 m